My Second Favourite job in the office.
Hah. Guess what? I've kinda finished up all possible task/things I could do in the office and had the supervisor and collegues asking if anyone has got things for me to do. There goes the 15mins. Just to find things for me to do!=.=
So...I've suggested something that I would wanna do....
Guess what isit??
Alright I'll give you a hint. Look at the pic below.
Any idea yet?
Hah! NAAAA.
Not packing the library again.
I've asked if I could build those CD racks!!
Serious! Not kidding! I really really want to, and really really did!
So...here I go.
Chloé's guild to building/fixing a Ikea CD rack. Aka the BENNO.
Nope. Chloé so smart. The instruction guide is not needed.
*Throw it away!*
Step 1: Open the package (with a negative sign screw driver. Trust me its easier and more efficient this way!)
This is how it looked like after it's opened.
Step 2: Differentiate the planks and spread them out.
Step 3: Open up a small cardboard box and you'll find this.
Step 4: Open the plastic package with screws etc. in it, and take out, 10 wooden thingy, 12 big long metal screw thingy, 12 big round metal nut?screw?(the flat round ones), & 6 nails.
Sorry la..I dunno the names of those la!
Step 5: Prepare your tools. You will need, a pair of sissors (for cutting the plastic wrap actually), positive and negative sign screw driver, and a hammer.
Step 6: Find the BIG BIG holes on the long wooden planks, and nail the wooden thingy in the holes using a hammer.
See the difference between the ones being hammered in and not?
Step 7: Using a screw driver, screw in the big long metal screw thingy, in the second largest holes on the wooden planks.
Step 8: Take the big flat screw/nut/bolt, and the think square wooden planks with 4 big holes on the big surface.
Step 9: Place the screws in. Having the arrow pointing out towards the holes at the side of the plank.
Step 10: push the screws/nuts/bolts in fully.
Step 11: Fit the planks in nicely sideways. The screw into the holes (why does it sounds so wrong here?!=.=) Use the handle of the hammer, if no strength.
Step 12: After all the planks are fitted into one side properly, fit the other side of the rack into the small wooden planks in.
Step 12 (tip): No strength? Turn it over, use your leg/step on it.
Step 13: Tighten the screws to secure the rack. (Looks like it alr doesn't it?)
Step 14: Slip the backing in.
Step 15: Hammer in the nails. 2 each at each square wooden planks. (The ones you've knocked in) (*a little tip* Do a marking at the side of the middle plank so you know where to nail)
TADA!! Its 3/4 done!!!
NEVER UNDERESTIMATE A GIRL OK!
MUAHHAhAHAHAHAHAAHhaHahahahahaaHhahAHA.
-------------------------------------------------
OKI! The fun is over! That's all for today! I'll be back tml...cos I WANNA WATCH TV ALREADY!
BYE BYE~